Corona Treater for Woven Sacks Printing Machine
Ozone Extraction Blower
HV Transformer
Corona Treater Panel
×
Corona treatment for woven sacks -PP/HDPE Woven sacks fabrics have to be corona treated before printing on the flexographic printing machine.
Corona treater a woven fabrics-Corona treatment system is a very effective way to increase the surface tension of virtually any material. The surface treatment is required for plastic films/fabrics whose normal surface tension is not sufficiently high to permit good wetting by flexographic inks.
Input supply | 415 V AC , ± 5 % , 3 Phase,4 -Wire |
Treatment Size | 600-1000 mm |
Line Speed | 60-120 mtr/minute |
Material | PP/HDPE/LAMINATED FABRIC |
Treating Sides | Both Side |
Input Frequency | 50 Hz |
Output Frequency | 20-50 KHZ |
Approx Output Power ( Kw ) | 3 KW |
Maximum Temperature | 0 ~ 50 Degree celsius |
Blower | 3 H.P |
Treatment Electrode | Multisegmented |
Dynes Level | 38-42 Dynes/cm |
Length Of Hv Cable | 2.5 Mtr |
Corona Output | Constant at same speed No influence of supply voltage Accurate output power Ultra high frequency using latest IGBT technology |
Certifications | CE , RoHs , ISO |